Shackle як лавозимоти ҷудонашавандаи таҷҳизот дар бардоштани корҳои сохтмонӣ мебошад. Занҷирро барои пайваст кардани шкивҳои бардошта ва ҳалқаи собит истифода бурдан мумкин аст. Ин як василаи сабук ва чандир аст, ки ба таври васеъ истифода мешавад.Занҷирҳоаз рӯи хусусиятҳои намуди зоҳирӣ ба занҷирҳои камон ва занҷирҳои U-шакл тақсим кардан мумкин аст. Мувофиқи мақсад, инҳоянд: занҷири занҷир, занҷири лангар ва занҷири шинокунанда.
(1) занҷирзанҷир is a занҷир used to connect the anchor chain. When in use, the horizontal bolt should be upward, and the horizontal bolt should be round to prevent it from rotating in the bolt hole and increase its strength. When using, first take out the horizontal bolt of the занҷир, put the U-shaped buckle into the anchor chain ring to be connected, and then connect the horizontal bolt in series to an anchor chain ring above. In order to prevent the horizontal bolt from coming out, there is an oblique hole at each of the two ends of the horizontal bolt and the U-shaped buckle for driving the brake oblique pin. In order to prevent the oblique pin from coming out, a green lead seal should be inserted into the cavity left at the pin hole. Before the oblique pin is inserted into the pin hole, calcium-based grease should be applied to prevent rust.
(2) Лангар занҷир is the занҷир used to connect the anchor chain and the sinker, and the method of use is the same as the chain занҷир.
(3) The floating занҷир is the занҷир used to connect the floating body and the anchor chain, and the method of use is the same as the chain занҷир.
